| |
Features of Production Line
- Inverter control for main motor, forming machine and haul off machine, save power, even running and low noise.
- To measure Semi-finished tube diameters is controlled by CCD chip(Toshiba of Japan) and MCU min chip(ATMEL of U.S.A)Chip, and to PWM signal. Fast speed, stability and good control.
- Main machine, speed reducer are adopted to hard gear speed reducer, screw, barrel material is 38CrMoAl. With nitrogen treatment; hardness: HV800-900, during, high plasticization. AI-cast heater, automatic fan cooling for temperature controlling.
- Forming wheel is made of excellent steel, Anti-corrosion, long life.
Drip Irrigation Tube Application:
Lt’s suitable to arid, half arid area climatic conditions, such as, Xingjian, Qinghai, Xizang, Neimeng, Shanxi etc. Apply to green house, various of crops, Orchard, vineyard, cotton etc. field.
Production Main Technique Data
Production Model |
SJ-50/30 |
SJ-55/30 |
Extrusion Output(kg/h) |
30kg/h |
40kg/h |
L/D |
30:1 |
30:1 |
Main Motor Power |
11kw |
15kg |
Haul off Power |
1.1kw |
1.1kw |
Forming Machine Power |
1.5kw |
1.5kw |
Heat Power |
12kw |
18kw |
Installation Dimension |
12m*3m*2m |
13m*3m*2m |
Weight(kg) |
2800kg |
3100kg |
Forming Wheel, Specification and Data
| O.D of Mould |
382 |
| Installation Dimension Center Distance
(m.m) |
≥200 |
| Output
(m/min) |
30-40 |
| Two Position Wind |
|
| Single Roller Wind(m) |
500-2000 |
| Drip Tape Intemal Diameter
(m.m) |
12-20 |
| Drip Tape Wall Thickness |
0.16-0.24 |
| Drip Flow(L/n) |
1.8-3.2 |
| Flow Error |
±5% |
| Work
Pressure
(Mpa) |
0.1-10.16 |
|
|
